What is the composition of T9 steel
Jan 07, 2026
A213 T9 is a 9Cr-1Mo-V martensitic heat-resistant steel. Its chemical composition contains approximately 0.1% carbon, 8-10% chromium, and 0.9-1.1% molybdenum. This alloy ratio gives it excellent high-temperature strength and creep resistance.
ASTM A213 T9 seamless steel pipe chemical composition:
Carbon: ≤0.15
Manganese: 0.30~0.60
Phosphorus: ≤0.025
Sulfur: ≤0.025
Silicon: 0.50~1.0
Chromium: 8.0~10
Molybdenum: 0.90~1.10
Mechanical properties:
Tensile strength: σb≥415MPa, indicating strong tensile load resistance.
Yield point: σs≥205MPa, the stress value it can withstand under certain deformation.
Elongation after fracture: δ%≥30, showing good plastic deformation capacity.
Hardness: HBW≤179, moderate hardness, easy to process and use.
A213T9 Alloy Steel Pipe Specifications: Outer diameter 21.36~762mm, Wall thickness: 2.0~130mm.
Production Method: Hot rolling, cold drawing, hot expansion. Delivery Condition: Heat treated.
High Pressure and High Temperature Resistance:
- Pressure Resistance: Can withstand a maximum working pressure of 17.5MPa (supercritical boiler standard), suitable for high-pressure environments.
- High Temperature Resistance: Long-term service temperature can reach 593℃, and short-term peak temperature can reach 650℃ without deformation, exhibiting excellent high-temperature resistance.
- Fatigue Resistance: No cracks were observed after 10^6 cycles of alternating load testing, indicating good fatigue resistance.
- Production Process: Manufactured using hot rolling or cold drawing processes, including round billet heating, hot rolling piercing, hot rolling sizing, normalizing + tempering, and eddy current testing, ensuring the quality of the steel pipe.
- Application areas: Primarily serves high-temperature and high-pressure fields such as power plant boilers, petrochemical equipment, and high-temperature pressure vessels, with broad application prospects.
A213 T9 Alloy steel seamless pipe factory







