What is the difference between SA 213 T11 and T22 pipe
Jan 07, 2026
The chemical composition of T11 alloy tubes is rigorously designed, typically containing 1.0%-1.5% chromium and 0.44%-0.65% molybdenum. This ratio gives it excellent stability in operating environments below 580℃. Compared to ordinary carbon steel tubes, its high-temperature strength is increased by approximately 40%, and its resistance to steam oxidation is more than three times higher. Particularly noteworthy is that by controlling the carbon content within the range of 0.05%-0.15%, this material ensures both weldability and sufficient high-temperature creep strength.
In terms of microstructure, T11 steel pipes, after normalizing and tempering heat treatment, form a uniform tempered bainitic structure. This structure effectively inhibits the aggregation and growth of carbides during long-term high-temperature service. Comparative tests conducted by a boiler manufacturer show that, under the same operating conditions, the service life of T11 pipes is approximately 20% longer than that of T22 alloy pipes, thanks to its more optimized alloy element ratio.
T22 boiler tubes are a low-alloy chromium-molybdenum steel (ASTM A213 T22), with a chemical composition primarily consisting of 1.0% chromium and 0.5% molybdenum. They possess excellent high-temperature resistance, high-pressure resistance, and creep resistance. In high-temperature environments (typically ≤580℃), T22 steel tubes maintain stable mechanical properties over long periods, making them particularly suitable for critical components of power plant boilers such as superheaters, reheaters, and main steam pipelines. Its technical standards must conform to ASTM A213 (seamless tube) or ASTM A335 (seamless steel tube for high pressure), and the domestic equivalent standard is the 15CrMoG grade in GB5310-2017.
Compared to ordinary carbon steel boiler tubes, the chromium-molybdenum alloy composition of T22 significantly improves its oxidation resistance and resistance to sulfide corrosion. Furthermore, heat treatment (such as normalizing and tempering) further optimizes the microstructure, ensuring fatigue resistance under high-pressure conditions. In addition, T22 steel pipes undergo rigorous ultrasonic testing, eddy current testing, and hydrostatic testing to eliminate defects such as microcracks or porosity.
A213 T11 and T22 Chemical Composition Comparison Table
| Element | T11 (ASTM A213) | T22 (ASTM A213) |
|---|---|---|
| Carbon (C) | 0.05%-0.15% | 0.05%-0.15% |
| Chromium (Cr) | 1.00%-1.50% | 1.90%-2.60% |
| Molybdenum (Mo) | 0.44%-0.65% | 0.44%-0.65% |
| Silicon (Si) | ≤0.50% | ≤0.50% |
| Manganese (Mn) | ≤0.30% | ≤0.30% |
A213 T11 and T22 Mechanical Properties Comparison Table
| Performance Indicator | T11 (ASTM A213) | T22 (ASTM A213) |
|---|---|---|
| Tensile Strength (σb) | ≥415 MPa | ≥415 MPa |
| Yield Strength (σs) | ≥205 MPa | ≥205 MPa |
| Elongation (δ) | ≥30% | ≥30% |
| Hardness (HB) | ≤163 | ≤163 |
A213 T11 and T22 Physical Properties Comparison Table
| Performance Indicator | T11 (ASTM A213) | T22 (ASTM A213) |
|---|---|---|
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
| Thermal Conductivity | 36.4 W/(m·K) | 36.4 W/(m·K) |
| Linear Expansion Coefficient (20-600℃) | 13.5×10⁻⁶/℃ | 13.5×10⁻⁶/℃ |
A213 T11 T22 alloy steel seamless pipe factory







