What is the specification of SA335 P22 pipe

Jul 03, 2025

1. Basic size range ‌
Outer diameter range ‌
Standard covers ‌21.3mm~762mm‌ (including ultra-small diameter 21.3mm to large diameter 762mm), and common specifications focus on typical sizes of industrial pipelines such as ‌60.3mm, 114.3mm, 219.1mm, 323.9mm, and 508mm‌.

Special needs can be customized with non-standard diameters of ‌10mm~2000mm‌ (need to be combined with production process feasibility).

Wall thickness parameters ‌
Conventional wall thickness ‌2.0mm~140mm‌, meeting low pressure to ultra-high pressure scenarios;
Thin-walled pipes as low as ‌0.5mm‌ (special process required to ensure strength).
️ ‌SA335 P22 Seamless Ferritic Alloy Steel Pipe
2. Material properties and technical indicators‌
Chemical composition (mass percentage)‌
Chromium-molybdenum alloy system: Cr 1.90-2.60%‌, Mo 0.87-1.13%‌ as core heat-resistant elements;
Carbon control range ‌0.05-0.15%‌, supplemented by ‌Mn 0.30-0.60%‌ and strictly restricted impurities (‌P≤0.025%, S≤0.025%‌).
Mechanical properties‌
Tensile strength ‌≥415MPa‌, yield strength ‌≥205MPa‌;
Elongation ‌≥30%‌, Brinell hardness ‌≤163HBW‌ (to ensure high temperature plasticity).

SA335 P22 seamless alloy steel pipe

3. Working conditions adaptability and limit parameters

Temperature-pressure tolerance
Continuous working temperature ≤580℃ (short-term peak tolerance 750℃);
Design pressure ≥9.8MPa, actual pressure in high-pressure scenarios ≥16MPa.

Manufacturing and processing technology
Delivery status: normalizing + tempering or fully annealed (optimizing high temperature stability);
Surface requirements: anti-corrosion galvanizing or rust removal sandblasting (key for corrosion resistance)