What is the temperature limit for T91 material
Mar 17, 2025
What is the temperature limit for T91 material?
I. Long-term use temperature
Conventional range: 580℃~600℃, which is the upper limit of safe use of T91 under sustained high temperature working conditions.
Standard basis: ASME Code recommends its use for boiler heated surface tubes (e.g. superheater, reheater) with steam temperature ≤600℃.
Second, the short-term peak temperature
Short-term tolerance: In non-continuous operating conditions, can withstand temperatures below 620 ℃, but need to strictly monitor the risk of oxidation and creep.
III. Key factors for temperature limitation
Oxidation resistance:
Above 600°C, the rate of surface oxidation accelerates significantly, and oxide skins may form leading to spalling and tube wall thinning.
Creep performance:
At 600 ℃, T91 creep fracture strength (such as 10 ^ 5 hours fracture strength) is about 80 ~ 100 MPa; temperature increases to 620 ℃, the strength of a sharp decline, may trigger pipe failure.
IV. Comparison with other materials
T91 vs T92:
T92 is optimised by adding tungsten (W), the long-term service temperature can be increased to 620℃, suitable for higher parameter units.
V. Precautions in practical application
Design margin: It is recommended that the actual operating temperature is 10~20℃ lower than the theoretical upper limit to avoid the risk of material aging and unexpected working conditions.
Environmental adaptation: in the environment containing sulfur or chloride ions, additional consideration of corrosive influences, high temperature may need to be used at a reduced rate.
Summary: A213 T91 has a long-term temperature limit of 600°C and a short-term peak of no more than 620°C. It is suitable for high-temperature components of subcritical/supercritical boilers, but it needs to be designed in combination with the operating pressure and environment.








